APX-XP-G6 Digital RF Signal Source Module

The APX-XP-G6 is a digital RF signal source module for integrators who need a clean, controllable signal to feed a power amplifier or a test setup.

It has two transmit channels: TX1 covers 70–2000 MHz at 0–7 dBm and TX2 covers 2000–6000 MHz at 6–19 dBm, with 50–400 MHz signal bandwidth and 0–10 dB digital attenuation. It is powered from 12–28 V DC at under 0.6 A, with SMA connectors and RS485 / Type-C control, in a 114 × 63.5 × 19.5 mm module.

For a system builder, the APX-XP-G6 is the signal source block that turns a bare power amplifier into a complete jamming chain.

Key Features

1) Two Transmit Channels, 70 MHz–6 GHz

• TX1: 70–2000 MHz, output 0–7 dBm
• TX2: 2000–6000 MHz, output 6–19 dBm

2) Wide Signal Bandwidth

• Signal bandwidth: 50–400 MHz
• Digital attenuation: 0–10 dB

3) Digital Control

• Interface: RS485 / Type-C
• Connectors: SMA

4) Low-Power Module

• Power supply: 12–28 V DC
• Current: ≤0.6 A
• Dimensions: 114 × 63.5 × 19.5 mm

Technical Specifications

RF Output

• TX1: 70–2000 MHz, output 0–7 dBm
• TX2: 2000–6000 MHz, output 6–19 dBm
• Signal bandwidth: 50–400 MHz
• Digital attenuation: 0–10 dB

Power & Interface

• Power supply: 12–28 V DC
• Current: ≤0.6 A
• Connectors: SMA
• Interface: RS485 / Type-C

Mechanical

• Dimensions: 114 × 63.5 × 19.5 mm

Application Scenarios

1) Counter-Drone Jamming Chains

Paired with a GaN power amplifier, the APX-XP-G6 provides the signal source for a complete jamming chain — feed the module's output into the amplifier and the system is ready to jam.

2) RF Test and Development

For RF engineers testing amplifiers, receivers and antennas, the module gives a controllable two-channel source from 70 MHz to 6 GHz with digital attenuation.

3) OEM and Custom Systems

Suitable for OEMs and integrators building their own counter-drone or RF products — the module supplies the signal while the host system provides power, control and housing.

4) Laboratory and Training Setups

For laboratory and training use, the APX-XP-G6 generates the signals needed to test detection and jamming equipment in a controlled environment.